如何更换油滤芯?
工具和材料:
- 新的油滤芯 *wrench
- Oil filter wrench
- Gloves
- Rags
步骤:
- ** Park the vehicle on a level surface and apply the parking brake.**
- Locate the oil filter. It is typically located under the engine, near the front or rear of the vehicle.
- Loosen the oil filter using the wrench. Turn counterclockwise until it is loose.
- Remove the old oil filter. Use the wrench to turn the filter counterclockwise until it comes loose.
- Allow the old oil to drain completely. Use a rag to catch any drips.
- Install the new oil filter. Hand-tighten the filter until it is snug.
- Tighten the oil filter with the wrench. Tighten the filter in a star pattern, tightening each bolt a little bit at a time until it is snug.
- Replace the oil drain plug. Tighten the plug clockwise until it is snug.
- Start the vehicle and check the oil level. Add oil if necessary.
- Dispose of the old oil and filter properly.
提示:
- Use a new oil filter every 7,500 to 10,000 miles.
- If you are not comfortable changing an oil filter, you can take the vehicle to a mechanic.