如何更换装载机机油过滤器?
工具：
- wrench
- socket set
- oil filter wrench
- new oil filter
步骤：
- Park the vehicle on a level surface and apply the parking brake.
- Locate the oil filter. The oil filter is typically located near the engine block or near the transmission.
- Disconnect the oil filter from the engine. Use the wrench to loosen the oil filter nut and remove the oil filter.
- Allow the old oil to drain out of the oil filter.
- Install the new oil filter. Hand-tighten the oil filter until it is snug.
- Tighten the oil filter nut with the wrench. Tighten the nut in a star pattern, tightening each bolt a little bit at a time until the filter is snug.
- Replace the oil filter cap.
- Start the vehicle and check the oil level. Add oil if necessary.
提示：
- Use a new oil filter.
- Tighten the oil filter nut evenly.
- Be careful not to spill oil.
- If you are not comfortable changing an oil filter, you can take the vehicle to a mechanic.
