如何更换刹车卡钳的 caliper bracket?

工具：

• 10mm wrench
• Flathead screwdriver
• Caliper bracket removal tool (optional)

步骤：

1. Loosen the caliper bolts: Use the 10mm wrench to loosen the four bolts that hold the caliper bracket in place.
2. Remove the caliper bracket: Remove the caliper bracket by pulling it straight off the caliper.
3. Remove the old caliper bracket: Remove the old caliper bracket from the caliper.
4. Clean the caliper surface: Clean the caliper surface thoroughly with a clean cloth to remove any dirt or debris.
5. Install the new caliper bracket: Apply a thin coat of lubricant to the threads of the new caliper bracket. Insert the new caliper bracket onto the caliper and hand-tighten the bolts until snug.
6. Tighten the caliper bolts: Use the 10mm wrench to tighten the bolts in a star pattern, tightening each bolt a little bit at a time until they are snug.
7. Adjust the caliper bracket: Use the flathead screwdriver to adjust the caliper bracket until it is seated properly.
8. Reinstall the caliper bracket: Reinstall the caliper bracket by pushing it onto the caliper and aligning the holes.
9. Tighten the caliper bolts: Use the 10mm wrench to tighten the bolts in a star pattern, tightening each bolt a little bit at a time until they are snug.
10. Check the caliper fit: Check the caliper fit by squeezing the caliper and ensuring that it moves freely.

提示：

• Use a clean and well-lit area for the installation.
• Use a torque wrench to tighten the caliper bolts to the specified torque.
• If the caliper bracket is damaged or warped, it may need to be replaced.