如何更换漏油过滤器?

工具：

*wrench *socket set *new filter

步骤：

1. Park the vehicle on a level surface and apply the parking brake.
2. Locate the oil filler cap and remove it.
3. Loosen the nuts on the old filter and remove it.
4. Disconnect the old filter from the engine.
5. Install the new filter, making sure the O-ring is seated properly.
6. Tighten the nuts in a star pattern until snug.
7. Replace the oil filler cap.
8. Start the vehicle and check for leaks.
9. Add oil to the engine until the level is correct.

提示：

• Use a wrench to loosen the nuts on the old filter.
• Be careful not to spill any oil.
• Use a new O-ring for a proper seal.
• Tighten the nuts in a star pattern until snug.
• Start the vehicle and check for leaks.